wiki:cypress/Python

Version 10 (modified by fuji, 8 years ago) ( diff )

Running Python on Cypress

Python Modules

As of August 18th, 2015 there are three (3) versions of Python available on Cypress

  • Python 2.6.6 is loaded by default for al users
  • Python 2.7.8 is available as part of the Anaconda module
  • Python 2.7.10 is available as a stand alone module

We currently do not have Python 3 installed on Cypress as we have had no requests for Python 3.

Anaconda

As the name implies, Anaconda is a larger version of Python. In addition to Python 2.7.8, Anaconda includes over 300 of the most requested Python packages. This includes

  • NumPy
  • Pandas
  • SciPy
  • Matplotlib
  • IPython.

A complete list of packages available though Anaconda can be found here.

Install Packages to Anaconda Python

'conda' is the command to add packages to Anaconda python distribution. However, since you don't have a permission in /share/apps/anaconda, it won't work. There is a workaround. Here, for example, we want to add 'vtk' python wrapper library.

conda install vtk

But you will see an error message with an instruction for the workaround. Following the instruction, you have to clone the python environment into your home directory by

conda create -n my_root --clone=/share/apps/anaconda/2/2.5.0

'my_root' is the name of environment that you decide. Then,

source activate my_root

Finally, you can install the package,

conda install vtk

In case you encounter "Error: 'conda' can only be installed into the root environment", try

conda remove conda-build
conda remoce conda-env
conda update -all
conda install vtk

From next time, to use Anaconda python with your environment,

module load anaconda
source activate my_root

You have to state above commands in your script when you run python on batch jobs.

Installing Packages

One of the best things about Python is the number of packages provided by the user community. On a personal machine, the most popular method today for managing these packages is the use of a package manager, like pip. Unfortunately, these require root access and are not a viable solution on Cypress.

There is an easy solution. Any well written Python package will allow the user to perform a "user only installation." This typically only requires the addition of a single flag when installing the package.

As an example, let's install the package Parallel Python (pp). If you wish to follow along, the package can be downloaded here.

When you have the packages tar file in the desired directory, you can unpack it with the tar command

[tulaneID@cypress1 ~]$ tar -xvf pp-1.6.4.tar.gz 
pp-1.6.4/
pp-1.6.4/doc/
pp-1.6.4/doc/ppserver.1
pp-1.6.4/doc/example.config
pp-1.6.4/doc/ppdoc.html
pp-1.6.4/pp.py
pp-1.6.4/README
pp-1.6.4/pptransport.py
pp-1.6.4/PKG-INFO
pp-1.6.4/ppcommon.py
pp-1.6.4/ppserver.py
pp-1.6.4/ppworker.py
pp-1.6.4/CHANGELOG
pp-1.6.4/MANIFEST.in
pp-1.6.4/AUTHORS
pp-1.6.4/ppauto.py
pp-1.6.4/setup.py
pp-1.6.4/examples/
pp-1.6.4/examples/reverse_md5.py
pp-1.6.4/examples/sum_primes_functor.py
pp-1.6.4/examples/auto_diff.py
pp-1.6.4/examples/callback.py
pp-1.6.4/examples/quicksort.py
pp-1.6.4/examples/dynamic_ncpus.py
pp-1.6.4/examples/sum_primes.py
pp-1.6.4/COPYING
[tulaneID@cypress1 ~]$

Now move into the package directory and examine the README file

[tulaneID@cypress1 ~]$ cd pp-1.6.4
[tulaneID@cypress1 pp-1.6.4]$ ls
AUTHORS    COPYING  examples     PKG-INFO   ppcommon.py  ppserver.py     ppworker.py  setup.py
CHANGELOG  doc      MANIFEST.in  ppauto.py  pp.py        pptransport.py  README
[tulaneID@cypress1 pp-1.6.4]$ cat README 
Visit http://www.parallelpython.com for up-to-date documentation, examples and support forums

INSTALATION: 
    python setup.py install

LOCAL DOCUMENTATION:
    <htmlviewer> pydoc.html

After using idev to launch and interactive session,let's try their instructions

[tulaneID@cypress01-035 pp-1.6.4]$ python setup.py install
running install
running build
running build_py
creating build
creating build/lib
copying pp.py -> build/lib
copying ppauto.py -> build/lib
copying ppcommon.py -> build/lib
copying pptransport.py -> build/lib
copying ppworker.py -> build/lib
running build_scripts
creating build/scripts-2.7
copying and adjusting ppserver.py -> build/scripts-2.7
changing mode of build/scripts-2.7/ppserver.py from 644 to 755
running install_lib
copying build/lib/pptransport.py -> /share/apps/anaconda/2.1.0/lib/python2.7/site-packages
error: [Errno 13] Permission denied: '/share/apps/anaconda/2.1.0/lib/python2.7/site-packages/pptransport.py'
[tulaneID@cypress01-035 pp-1.6.4]$ 

Our installation failed because we lack the permissions to add files to the system wide Python installation. But that's not what we want anyway, we just want to install the package for our personal use. We need to add the flag - -prefix=$HOME to tell the installer where to place the package.

[tulaneID@cypress01-035 pp-1.6.4]$ python setup.py install --prefix=$HOME
running install
running build
running build_py
running build_scripts
running install_lib
creating /home/tulaneID/lib
creating /home/tulaneID/lib/python2.7
creating /home/tulaneID/lib/python2.7/site-packages
copying build/lib/pptransport.py -> /home/tulaneID/lib/python2.7/site-packages
copying build/lib/pp.py -> /home/tulaneID/lib/python2.7/site-packages
copying build/lib/ppworker.py -> /home/tulaneID/lib/python2.7/site-packages
copying build/lib/ppcommon.py -> /home/tulaneID/lib/python2.7/site-packages
copying build/lib/ppauto.py -> /home/tulaneID/lib/python2.7/site-packages
byte-compiling /home/tulaneID/lib/python2.7/site-packages/pptransport.py to pptransport.pyc
byte-compiling /home/tulaneID/lib/python2.7/site-packages/pp.py to pp.pyc
byte-compiling /home/tulaneID/lib/python2.7/site-packages/ppworker.py to ppworker.pyc
byte-compiling /home/tulaneID/lib/python2.7/site-packages/ppcommon.py to ppcommon.pyc
byte-compiling /home/tulaneID/lib/python2.7/site-packages/ppauto.py to ppauto.pyc
running install_scripts
copying build/scripts-2.7/ppserver.py -> /home/tulaneID/bin
changing mode of /home/tulaneID/bin/ppserver.py to 755
running install_egg_info
Writing /home/tulaneID/lib/python2.7/site-packages/pp-1.6.4-py2.7.egg-info

We now have our own personal build of parallel python.

[tulaneID@cypress01-035 pp-1.6.4]$ python
Python 2.7.8 |Anaconda 2.1.0 (64-bit)| (default, Aug 21 2014, 18:22:21) 
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
Anaconda is brought to you by Continuum Analytics.
Please check out: http://continuum.io/thanks and https://binstar.org
>>> import pp
>>> pp.version
'1.6.4'
>>> 

Running Python Interactively

Start an interactive session using idev

[tulaneID@cypress1 pp-1.6.4]$ idev 
Requesting 1 node(s)  task(s) to normal queue of defq partition
1 task(s)/node, 20 cpu(s)/task, 2 MIC device(s)/node
Time: 0 (hr) 60 (min).
Submitted batch job 52311
Seems your requst is pending.
JOBID=52311 begin on cypress01-035
--> Creating interactive terminal session (login) on node cypress01-035.
--> You have 0 (hr) 60 (min).
[tulaneID@cypress01-035 pp-1.6.4]$ 

Load the desired Python module

[tulaneID@cypress01-035 pp-1.6.4]$ module load anaconda
[tulaneID@cypress01-035 pp-1.6.4]$ module list
Currently Loaded Modulefiles:
  1) git/2.4.1           3) idev                5) anaconda/2.1.0
  2) slurm/14.03.0       4) bbcp/amd64_rhel60

Run Python in the command line window

[tulaneID@cypress01-035 pp-1.6.4]$ python
Python 2.7.8 |Anaconda 2.1.0 (64-bit)| (default, Aug 21 2014, 18:22:21) 
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
Anaconda is brought to you by Continuum Analytics.
Please check out: http://continuum.io/thanks and https://binstar.org
>>>

Running a Python script in Batch mode

You can also submit your Python job to the batch nodes (compute nodes) on Cypress. Inside your SLURM script, include a command to load the desired Python module. Then invoke python on your python script.

#!/bin/bash
#SBATCH --qos=normal            # Quality of Service
#SBATCH --job-name=python       # Job Name
#SBATCH --time=00:01:00         # WallTime
#SBATCH --nodes=1               # Number of Nodes
#SBATCH --ntasks-per-node=1     # Number of tasks (MPI processes)
#SBATCH --cpus-per-task=1       # Number of threads per task (OMP threads)

module load anaconda
python mypythonscript.py

Running a Parallel Python Job

The exact configuration of you parallel job script will depend on the flavor of parallelism that you choose for you Python script.

As an example we will use the Parallel Python (pp) package that we installed above. Parallel Python used the shared memory model of parallelism (analogous to to OpenMP). Let's run the sum of primes example from the Parallel Python website.

We need to communicate the number of cores we wish to use to our script. The syntax here is

python sum_primes.py [ncpus]

We can communicate the SLURM parameters to the script using the appropriate SLURM environment variable.

#!/bin/bash
#SBATCH --qos=normal            # Quality of Service
#SBATCH --job-name=python       # Job Name
#SBATCH --time=00:01:00         # WallTime
#SBATCH --nodes=1               # Number of Nodes
#SBATCH --ntasks-per-node=1     # Number of tasks (MPI processes)
#SBATCH --cpus-per-task=15      # Number of threads per task (OMP threads)

module load anaconda
python sum_primes.py $SLURM_CPUS_PER_TASK

Installing Packages

See here.

Note: See TracWiki for help on using the wiki.